ECU, Wiring, Sensors
User avatar
By chaosdriving
#263242 ok now i found the 4 wires that go to the injectors, 1 wire had 12 volts to it and the other 3 left have nothing... were those 3 wires suppose to be getting the 12 volts too?? or can i just block off those three wires and hook that one wire with 12v to the red wire on the resistor box? or do i connect the 12v wire to the other 3 wires thennn connect it to the red resistor wire?
User avatar
By chaosdriving
#263314 I understand that part, I just have 4 wires left, and one has 12v and the other 3 donot, do I connect all 4 together then wire that to the last wire comming off of the reistor or do I just wire the 12? Wire to the last resistor wire and just tape off the other 3?