ECU, Wiring, Sensors
By jeron_imo31
#256146 I have a 94 civic hatch with obd1 pr4 and b18a. I have a check engine light and i found the ONLY 2 pin connector in the kick panel, it is a blue connector when i jump the connector the check engine light shuts off and the srs light flashes, when i plug a p06 in and jump the connector the cel flashes. I have searched around and had no luck with this issue. anyone else experience this?
User avatar
By B20vtec-turbo
#259102 When you jump the connector the CEL is suppose to flash. That's what it's there for...

A long flash stands for 10, while a short flash stands for 1.

Example; if you have 2 long flashes and 2 short flashes, you have a code 22.