ECU, Wiring, Sensors
User avatar
By slowj1
#234866 How do I check my ecu (p28) to see if it works? My car shut off at a stop sign today and does not want to restart! Any ideas/ suggestions would be greatly appreciated
User avatar
By slowj1
#234872 ok so the car cranks but has no spark. I'm getting fuel and can hear the pump hum when turing the ignition on. No CEL or anything. I replaced the distributor unfortunatly because the rotor would not come off the damn thing and i could not test the coil or ignitor, so that is all new. I'm really confused!!! :cry:
User avatar
By Aldo91
#234894 hey man i got your voice mail. you might want to go to a junkyard and tell em your problem and ask if you can borrow an ecu from them to see if the actual computer is your problem. the mexicans there are usually chill with things like that its a junk yard called "pacific" honda, ill ask around and see if any of my friends know about this problem.
User avatar
By slowj1
#234938 Thanks man! I really hope to have this fixed tomorrow or the moto will be my only transportation until it is fixed