Ecu help
Posted: Tue Sep 14, 2010 7:13 amI got a 94 civic dx P06 and was wondering what would be good to go with on my build for ecu wise, Or if I should just go with this http://www.phearable.net/shoppingcart/c ... -p-32.html
Page 1 of 1
Posted: Tue Sep 14, 2010 7:13 amPosted: Tue Sep 14, 2010 1:56 pmtell us the specs of your build
Posted: Tue Sep 14, 2010 2:05 pmB18A1
Arp Headstuds
Arp connecting rod bolts
Arp flywheel bolts
Stage 3 clutch 12 lb flywheel.
Cometic Headgasket .027
Walboro 255 fuel pump
440CC Injectors
Stage 3 clutch 12 lb flywheel.
Gates timing belt
T04E turbo
38mm wastegate
2.5 exhaust piping
stock pistons and rods
Nippon piston rings. 10 Psi on boost
AEM Wideband
Also would I need to run VAFC or not been told different things however I am not doing Vtec. So if you could help with that question to lol. Thanks
Arp Headstuds
Arp connecting rod bolts
Arp flywheel bolts
Stage 3 clutch 12 lb flywheel.
Cometic Headgasket .027
Walboro 255 fuel pump
440CC Injectors
Stage 3 clutch 12 lb flywheel.
Gates timing belt
T04E turbo
38mm wastegate
2.5 exhaust piping
stock pistons and rods
Nippon piston rings. 10 Psi on boost
AEM Wideband
Also would I need to run VAFC or not been told different things however I am not doing Vtec. So if you could help with that question to lol. Thanks
Posted: Tue Sep 14, 2010 2:15 pmafter having your ecu chipped you won't need the vafc,also you might want to look into http://xenocron.com/ ,i get my stuff from them and are cheaper
Posted: Tue Sep 14, 2010 5:04 pmYeah ditch that VAFC, it is 10 yr old technology. A chipped & tuned ecu will be more reliable
Posted: Wed Sep 15, 2010 6:05 amOk great just checking and all was unsure of ecu and good thing I did not buy vafc