fuse box in glovebox
Posted: Tue Jun 15, 2010 4:50 amcan some one tell me how to dooooooo it!!!!!! 
Page 1 of 1
Posted: Tue Jun 15, 2010 4:50 amPosted: Tue Jun 15, 2010 3:58 pmBut why? Is this more of that wire-tuck idiocy?
fuse box
Posted: Wed Jun 16, 2010 6:03 amyes ive heard around and seen pics of people putting their fuse box in the glove box right now i have mine under the dash... i dont like it there
Posted: Wed Jun 16, 2010 12:54 pmIt's probably just a matter of fitting it in there ans securing it with a bracket. Then drilling a hole to run the wires through.
The only PITA I for see is those power wires are thick, like 8 ga or 4 ga. Might be tough to route those in tight spaces...
For as little as the fuse box is used, I wouldn't do it unless you have to. It's going to take some work...
The only PITA I for see is those power wires are thick, like 8 ga or 4 ga. Might be tough to route those in tight spaces...
For as little as the fuse box is used, I wouldn't do it unless you have to. It's going to take some work...
Posted: Thu Jun 17, 2010 4:04 amhmmm well i have it hanging under the dash right now i want to secure it somewhere want me to take a pic and show you?
Posted: Thu Jun 17, 2010 1:37 pmI can see what you're trying to do, no pic needed 
You'll need to test fit it in the glove box first, and if it fits and you can secure it, then figure out how to run all the wiring. I'm betting you'll be drilling some holes in the back of the glove box.
You'll need to test fit it in the glove box first, and if it fits and you can secure it, then figure out how to run all the wiring. I'm betting you'll be drilling some holes in the back of the glove box.
Posted: Fri Jun 18, 2010 6:41 amwell i cant get the metal bracket off the fuse box