jdm rear fog light

Does anyone know how to wire up a rear fog light????? I've serched for a diy but they r ghetto and wack installs.... can I use a passwordjdm fog light harness????
deschlong wrote:Ugh. You don't put a hole in the bumper to make your rear fog light on a 5th Gen. Not only is it not OEM, it looks like ass.
Here's the best and cheapest way to make it look like OEM, from my own DIY.
deschlong wrote:Not a chance. That's all my original work. I'd like to see this other website that plagiarized my work, though.
Regardless - if you have a 6th Gen, the principle is the same. The rear fog is integrated into the existing tail lamp. Anything mounted in your bumper or elsewhere is aftermarket. Hopefully you've done your research. Uh, unless you're happy with aftermarket parts and holes in your bumper.
deschlong wrote: The rear fog advertised there is for a 4th Gen Civic (and the 94-01 Integra). For them to state that it is also for a 6th Gen is disingenuous
deschlong wrote:The ONLY place rear foglights are installed is in the driver's side tail lamp. The EDM parts catalogue says this, the EDM Helms Service Manual says this, and any European EK owner will tell you this. Explain to me how these are wrong? If you believe anything different, it is because you are not well-informed.