Page 1 of 1

Wiring sitting in my bay?

PostPosted: Wed Jul 29, 2009 4:06 am
by misir00
I was just taking a look at some cut and exposed wires in my bay and i found that all this wire was connected but wasnt going anywhere
so i disconnected it and my car still runs fine and everything works

it has two fuse holders, one of the fuses are blown and two power wires and one is cut

it came off the bottom screw
Image

this is what came out
Image

this is the part that was connected to the lower screw in the first link/pic
the two black things are the fuse holders
Image

PostPosted: Wed Jul 29, 2009 4:35 am
by teal_dx
maybe someone installed aftermarket fogs at one time & removed them :?

PostPosted: Wed Jul 29, 2009 4:16 pm
by dawg316
looks like some wiring left from an aftermarket part. you dont need to worry about it. teal said could be fog lights from previous owner or neons or somthing.

PostPosted: Wed Jul 29, 2009 5:44 pm
by misir00
well the guy i bought the car off of said the car was already wired for fogs
when i was taking a look at the wires they were all chopped up and werent really connect

PostPosted: Wed Jul 29, 2009 7:33 pm
by VegasCivic
Those are for aftermarket halo lights without a doubt. I sadly had some and this is exatly what the harness looked like. If you have stock lights the other half of the harness is probably gone.

Nothing to worry about :thumb:

PostPosted: Thu Jul 30, 2009 12:20 am
by misir00
VegasCivic wrote:Those are for aftermarket halo lights without a doubt. I sadly had some and this is exatly what the harness looked like. If you have stock lights the other half of the harness is probably gone.

Nothing to worry about :thumb:


i have projector headlights in the car right now

PostPosted: Thu Jul 30, 2009 1:30 pm
by Lowkei
I went a took a picture of mine, I had the one power wire and the other that gets lost in the harness somewhere???

I don't understand what you are talking about. Sorry, I'm being nosy :?

Image

PostPosted: Thu Jul 30, 2009 2:12 pm
by VegasCivic
^ nothing for you to worry about. He had aftermarket wiring.

PostPosted: Fri Jul 31, 2009 4:35 am
by misir00
VegasCivic wrote:^ nothing for you to worry about. He had aftermarket wiring.


yea that pic is what mine looks like now