Page 1 of 2
K20 swap parts list
Posted:
Mon Nov 13, 2006 6:53 pmby teal_dx
* K series motor/tranny/ECU
* K series engine harness
* K series charging harness
* conversion harness
* B/D series coolant temp sensor and fan switch
* fuel rail
* Universal Fuel Pressure regulator
* Custom Fit Fuel lines
* OEM RSX shifter Box or Modified Accord shifter box
* RSX Shifter Cables
* Shifter linkage Clips
* Aftermarket intake
* Aftermarket Header
* Custom Mid Pipe
* Throttle cable for your application
* EP3 pulley and belt (if retaining AC and OEM belt)
Posted:
Tue Nov 14, 2006 1:52 amby ohDirka
puttin a k20 in the hatch?
Posted:
Tue Nov 14, 2006 2:20 pmby teal_dx
nah, K-series is nice but too expensive for me... One day I'd like to go the N/A K route after my SOHC is retired.
Posted:
Wed Nov 15, 2006 6:08 amby littledelsol
After I finish my engine I plan on buying another del sol and swapping in a K. So this should come in use in a couple months.
Posted:
Mon Jun 04, 2007 7:28 pmby marcokeg20
* K series motor/tranny/ECU
* K series engine harness
* K series charging harness
* conversion harness
* B/D series coolant temp sensor and fan switch
* fuel rail
* Universal Fuel Pressure regulator
* Custom Fit Fuel lines
* OEM RSX shifter Box or Modified Accord shifter box
* RSX Shifter Cables
* Shifter linkage Clips
* Aftermarket intake
* Aftermarket Header
* Custom Mid Pipe
* Throttle cable for your application
* EP3 pulley and belt (if retaining AC and OEM belt)
and:
wide band lambda sensor
engine mounts
axle's
and if you've a.b.s in a eg: take it out, because the engine will fit better then
* OEM RSX shifter Box or Modified Accord shifter box
i've used the original cable's from the ep3 . and i drilled a hole in my fire wall. then ive mounted a del sol dash in my eg with a shiftplate from the ep3'. so my shifter wasn't on the floor anymore
Posted:
Tue Jun 05, 2007 9:14 pmby marcokeg20
fuel rail
k-pro hondata
shiftnob
invidia g200
ep3 radiateur
special axle's
mount's.
r crew sub harness
k20a2 engine ( duh )
r crew header:
and i ve used the original trammy cabels of the ep3
and fitted a aem fuel pressure regulator
fuel line
Posted:
Tue Jun 05, 2007 9:28 pmby stefan
Porn on wheels Marco
Posted:
Tue Jun 05, 2007 9:31 pmby marcokeg20
porn on my pc
Posted:
Tue Jun 05, 2007 10:15 pmby LaMbErT*
Posted:
Thu Aug 09, 2007 4:21 pmby vtec_gloucester
im really temped to do a K swap next... think i'll wait til parts are abit cheaper and easier to get in the Uk first though!
Posted:
Sat Dec 15, 2007 2:33 amby split sec eg
i been working at a wrecking yard for 2 years jess waiting till a k come by ... till then im happy with my b20 vtec
Posted:
Sun Dec 16, 2007 10:47 amby hontec
split sec eg wrote:i been working at a wrecking yard for 2 years jess waiting till a k come by ... till then im happy with my b20 vtec
you sure the wrecking yard is not out of business?
we have em flushing by once every month...
Posted:
Sun Dec 16, 2007 8:23 pmby LowTEC-Derbo
if my d fails to make me happy, its time for a K. :]
Posted:
Sun Dec 23, 2007 7:54 pmby Ej2-B16a
personally , i don't VTEC lol
Posted:
Mon Jan 07, 2008 5:51 amby Benj
