H22A
By Sincere
#229466 Well shit if moneys no issue buy those, the kit im planning on getting is by innovative
By Swamp_thing
#229602 i plannedon getting them,but b4 i drop the H in,im getting it fully built,sleeved,bored,port n polish head,n boostin itnprolly gettin it tuned on either Crome, NepTune or Hondata
By Sincere
#229623 How much is all that going to run
By Swamp_thing
#229708 around 4 grand before the tune,and the tune is another 3-500 bucks..but itll put out wayyy better numbers than a GSR lol
By 716_EG
#231888 Hey ladies and gents...This is Swamp_thing...had to get a new I.D lol...When i put the my H in,what belt do i get for it if i remove my PS?
User avatar
By Dirtonaboi
#245126 I'm getting ready to do the swap, I'm waiting on shifter and cables to arrive. Should be here any day. I should have the axles this week. I'm going to follow the instructions posted here and in the DIY post as well. I'll post pics on my progress! Dirt out!
By cjw_89
#263808 ok so you used innovative mounts for the h22 swap.What if i want to use a f22 gearbox what mounts do i opt for then ?
User avatar
By jigga36
#264291 I think you can use the same mounts since the F trans bolts right up to the H block
By Null3D
#307377 i have herd you dont need a resistor box. one of my friends said he has never ran one. why would u have to run one ?
User avatar
By jigga36
#307378 The h22a4 does not need the resistor box. The box controls the injectors. So 92-96 h22a needs it. 97+ does not need the box
By Stam
#308759 hi there sorry for the reply on an old thread
but im curius
what kind os shifter do you use?
and also what kind of shifter cables did you use?
User avatar
By Rmnpvlyk
#341380 For my swap i have an accord tranny with original axles from prelude. They sit at an angle. They only snap when the clutch is dropped too fast.
Also i put in the original ecu from the prelude and it still pulls good. I hve a/c connected for now. But not gonna have room for it when i go turbo