EGR code.
Posted: Sat Mar 29, 2008 1:00 amhas any other h22a owners have problems with there EGR CEL keep coming on? even after it's been cleaned out? i can only drive for about 30 min, then the it comes on.
Page 1 of 1
Posted: Sat Mar 29, 2008 1:00 amPosted: Sat Mar 29, 2008 1:07 amWhat ECU are you using??
Posted: Sat Mar 29, 2008 1:41 amp13 at the moment.
Posted: Sat Mar 29, 2008 1:59 amTry a P72, that might do the trick.
Posted: Sat Mar 29, 2008 2:02 ami had that exact same problem. i cleaned it and tested the connector as well as the bladder. my cel would come on rather quickly and it was always for that. i just disconnected the vaccum line becuase i didnt have enough to buy a new one
Posted: Sat Mar 29, 2008 5:42 pmvacuum line? i think i've only got the connector on the egr valve. i will have to double check. when i took it apart to clean it, the plunger part worked pretty good.
Posted: Sat Mar 29, 2008 6:45 pmya i think it was the bladder on mine that went not a %100 though. there is a vaccum line that runs to it i took that and plugged it up and everything still worked fine for me but the cel would still pop up. so i did that cuz my car would stutter once the light came on
Posted: Wed Apr 02, 2008 2:11 pmi doubled check, and i've only got the connector on the egr. no vacuum line.
Posted: Sun Apr 06, 2008 3:24 pmthat might be your problem then itf its not there and plugged up or connected it might throw the code