H22A
By gt35civic
#349113 hi guys,

when i got my civic it had a turbo manifold on it but no turbo, the guy reckoned he had trouble fitting the turbo because was hitting on stuff. i cant see it working unless the radiator was smaller im guessing the prelude that motor came out of prob has more room in the front of the manifold to fit the turbo but no room for dump pipe with this manifold

only solution i can see is cut the flange off and rotate the turbo like in the pic

Image

has anyone else used this manifold? im even thinking of getting a different one

like this maybe
http://www.ebay.com.au/itm/92-96-97-01- ... 5d2822eff9

or this one but not sure if it works with the alternator in the stock position?
http://www.ebay.com.au/itm/281465443911 ... 1423.l2661
User avatar
By JUICE
#349118 I'd stay away from the cheap stainless manifolds, they're gonna crack. And I've always thought those PLM's were kinda sloppy.

Here's a pretty nice one.. http://www.treadstoneperformance.com/product.phtml?p=12636&cat_key=2496&prodname=DOC+Race+Bottom+Mount+Manifold+-+H22+Manifold+T3%2FT4+%2892-99+Honda+Civic+H+Series+engine%29


Or the cheaper route.. http://www.go-autoworks-store.com/gocairhsetum.html
By gt35civic
#349227 ended up modding the manifold not real pretty but will do the job

clearance for the dump and intake now:)

Image

Image

Image