Page 1 of 1

H2B oil PAN

PostPosted: Wed Oct 13, 2010 9:15 pm
by 92dxeg
ok i few of my friends want to do anh2b swap and there were jw if there is a company that makes an oil pan for an h2b swap. so u dont have to rig one up. like is there one with the oil drain plug in the front

PostPosted: Wed Oct 13, 2010 9:24 pm
by Method
why do you have to move it? does it interfere?

put a plug in the original one, and drill and tap a new one on the other side.

PostPosted: Thu Oct 14, 2010 10:14 am
by 92dxeg
thats what iwas told jw

PostPosted: Thu Oct 14, 2010 10:59 am
by Method
i don't know will cause the b-series tranny to conflict with the oil pan drain plug.

PostPosted: Thu Oct 14, 2010 10:59 pm
by 92dxeg
what will cuase it to conflect if the oil pan drian plug was in the front of the oil. i was told it was a must for an h2b the u pretty much have a customoil pan does any1 hve any insite on this who has the done the swap

PostPosted: Fri Oct 15, 2010 1:00 am
by 1995db7
Method wrote:why do you have to move it? does it interfere?

put a plug in the original one, and drill and tap a new one on the other side.


it does not interfere but with any h2b kit you have to grind a small amount from the block n oil pan to house the b series axle on the driver side

PostPosted: Sun Oct 17, 2010 8:11 am
by mooze
yeah keep stocky. i think i posted pics of where 2 cut