H-series engine specs
Posted: Fri Nov 10, 2006 6:12 pmengine - cc - hp - tq - compression ratio - bore (mm) - stroke (mm) - head - vtec - OBD - vehicle
Page 1 of 1
Posted: Fri Nov 10, 2006 6:12 pmPosted: Sat Dec 09, 2006 12:01 ami got me an h22a
Posted: Wed May 14, 2008 12:10 amhehehe 220 FTW!!!! lol
Posted: Fri Feb 06, 2009 12:53 amIf you have a JDM h22a, how do you know which one you have?
Posted: Fri Feb 06, 2009 2:08 amDeath_Blooms wrote:If you have a JDM h22a, how do you know which one you have?
thats a good one, i'd like to know also. maybe reading the serial under the engine code. i've haven't been able to find a site that can tell me what the serial means.
Posted: Wed Mar 18, 2009 10:36 pmwhat about the h22a7
Posted: Wed Mar 18, 2009 11:28 pmMethod wrote:Death_Blooms wrote:If you have a JDM h22a, how do you know which one you have?
thats a good one, i'd like to know also. maybe reading the serial under the engine code. i've haven't been able to find a site that can tell me what the serial means.
if you look on the head right below the valve cover there is like 3 round circles all with letters or numbers on them i think the third dial will tell u your year like one end of the pointer will be at a 9 the other will be at a 4 meaning you have a 94 year engine so then look at the chart and see what u got
hope this helpsPosted: Sun Jun 21, 2009 9:51 pmim pretty sure theres a h23a from a Honda Prelude 97-01 & Honda Accord 98-02 that is dohc vtec....
and the hp is 197 and torque is 160
and the hp is 197 and torque is 160
Posted: Mon Jun 22, 2009 4:47 ammisir00 wrote:im pretty sure theres a h23a from a Honda Prelude 97-01 & Honda Accord 98-02 that is dohc vtec....
and the hp is 197 and torque is 160
yes there is and they are quick
Posted: Mon Jun 22, 2009 5:08 am94_jdm_ferio wrote:misir00 wrote:im pretty sure theres a h23a from a Honda Prelude 97-01 & Honda Accord 98-02 that is dohc vtec....
and the hp is 197 and torque is 160
yes there is and they are quick
yea im looking into one and i need some help
the engine alone cost 1400 and i need ecu tranny and driveshafts (ithink)
what tranny and ecu should i use
Posted: Mon Jun 22, 2009 5:14 amnot sure but there is a guy here that has the swap done, you could ask him
he is xEGFERIOx
he is xEGFERIOx
Posted: Thu Jun 17, 2010 10:36 pmDeath_Blooms wrote:If you have a JDM h22a, how do you know which one you have?
HEAD STAMP. look for the code on the head...should b p13 or pde or sumthing
Posted: Thu Jun 17, 2010 10:38 pmmisir00 wrote:im pretty sure theres a h23a from a Honda Prelude 97-01 & Honda Accord 98-02 that is dohc vtec....
and the hp is 197 and torque is 160
the H23A VTEC did not come in preludes.....accords only..non VTEC was prelude motor
Posted: Fri Jun 18, 2010 2:36 amyou brought this post back from the dead lol
so old i dont even own a eg anymore, EK tings now
but still i did not know that thanks
so old i dont even own a eg anymore, EK tings now
but still i did not know that thanks
Posted: Wed Jan 15, 2014 6:03 am98 h22a
Its jdm if valve cover is red stock
Its jdm if valve cover is red stock