Civic EG

Posted: **Thu Jul 12, 2007 10:51 pm**

The axles that I bought that came with the engine does not fit. The shop said its too long and he can get one end in but not the other. What can I do or what other axles can I buy??? I'm trying to get H22 into a 95 civic

Posted: **Thu Jul 12, 2007 11:12 pm**

If you use stock axles, use a prelude inner, and a integra outer. That's if you are using the prelude intermediate shaft.

Or....
94-97 accord midshaft.. and 90-93 integra axles

Posted: **Thu Jul 12, 2007 11:35 pm**

Can I buy this? http://cgi.ebay.com/ebaymotors/CV-Axles ... dZViewItem
Will that axle fit in my car

Posted: **Thu Jul 12, 2007 11:44 pm**

ttttrigg3r wrote:Can I buy this? http://cgi.ebay.com/ebaymotors/CV-Axles ... dZViewItem
Will that axle fit in my car

From the looks of it, yes. Thats how the seller's advertising them, plus there are shops that make them to bolt right in.

Posted: **Fri Jul 13, 2007 7:35 pm**

depends if you have an lsd or not thats another reason for common axle problems when you dont specify what you have i had that problem cuz i have a lsd

Posted: **Sat Jul 14, 2007 2:20 pm**

yes I have an lsd is that why ?

Posted: **Sat Jul 14, 2007 2:26 pm**

H22+LSD-EJ2 wrote:depends if you have an lsd or not thats another reason for common axle problems when you dont specify what you have i had that problem cuz i have a lsd

I almost dis-agree with that. I have LSD and I can swap in any B-series axle without issue. LSD doesnt affect how the axle sits in the trans, at least not that I'm aware of.

Posted: **Sat Jul 14, 2007 7:51 pm**

ok I just bought this http://cgi.ebay.com/ebaymotors/ws/eBayI ... 779&rd=1,1
Do i have to worry about intermediate shaft or half shaft or honda prelude or integra shaft or anything like that?
I know nothing about axles, I dont even know how they work so please tell me if I need something else

Posted: **Sun Jul 15, 2007 3:47 pm**

i said that because i have hasport axles and they sent me non-lsd axles because they said it didnt matter. put them in and they didnt fit so i called they said do you have an lsd i said yes they said thats why, which is stupid beacuse they said it didnt matter in the first place

Posted: **Fri Jul 27, 2007 12:30 am**

OK so the axles is in the car I took it out the shop and on the way back the car was shaking really bad for all gears at all speed. The mech says that the driver side axle is 1/2" too long. These are the axles in the car:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=007&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=170103862779&rd=1
What can I do to fix it or what axles I buy to get everything going smooth again? I really don't know how axles work and everytime someone just tell me get prelude axle and integra axles. I don't know anything about that so please put everything in terms a dummy like me can understand.

H22A----> 95 Civic EX

Posted: **Sat Jul 28, 2007 11:58 am**

Posted: **Sat Jul 28, 2007 1:07 pm**

1st go to your local Honda dealer and order this.....94-97 accord midshaft.

Then go to your local parts store and order these.... 90-93 integra axles.

You should have no problems if you do this, and you can re-sell the crap you bought off EbAy.

Posted: **Sat Jul 28, 2007 2:51 pm**

i personally bought hasport for this reason. the lsd does make a difference because this happened to me it shook at very low speeds and they said there is a difference in the axles. just make sure you buy some nice stuff and not no name parts :thumb:

Posted: **Mon Jul 30, 2007 1:44 pm**

according to the hasport website http://hasport.com/shop/product_info.ph ... ucts_id=29
the axles only work with the mount kit. So does that mean that you have the hasport mount kit installed too

Posted: **Mon Jul 30, 2007 2:27 pm**

yea i have hasport mounts to what do you have? avids?

Civic EG

Help!! axle problem

Help!! axle problem